Last updated:

Your heat pump runs all afternoon and still can’t hold the back of the house. Now the question is whether to replace it with the same size, go bigger, or find out where the air is going first.

Sweet Olive installs and replaces ducted air-source heat pumps in homes across Metairie and the rest of our service area. Here the permit goes to Jefferson Parish, not to City Hall in New Orleans, so we plan the filing along with the equipment. On the first visit we test the ducts, check the panel and look at the side yard where the outdoor unit sits. You get a written estimate that names the equipment, the duct work, the wiring and the parish permit steps.

If the system still works and you want to know how long it has left, start with an inspection. If it is failing, our replacement page covers the decision, and new installation covers houses with no central system yet.

Inside a Metairie heat pump replacement

A worn system, a warm back bedroom, a 36-inch side gate and a Jefferson Parish filing: how those local conditions shape one replacement.

Worn outdoor unit on its pad beside a Metairie ranch house before replacement
Before
New matched heat pump outdoor unit on the same pad beside a Metairie ranch house
After
Location
Metairie, Jefferson Parish
Home
Single-story home, about 1,650 sq ft, three bedrooms
System
Nominal 3-ton variable-capacity matched system
Ductwork
Existing ducts kept; two loose connections resealed
Access
36-inch side gate, utility-closet air handler
Line set
30 feet, new
Project price
$7,850
Duration
2 working days

The setting

A slab house, a side gate and a parish filing

The home is a single-story house on a slab in Metairie, about 1,650 square feet with three bedrooms. Its ducted heat pump is worn out, and the back bedroom runs warmer than the living room. The air handler sits in an interior utility closet; the outdoor unit sits on a pad in a side yard reached only through a 36-inch gate. Because Metairie is unincorporated, the replacement is filed with Jefferson Parish before any work is booked.

The decision

Find the lost air before choosing the size

The load calculation supports a nominal three-ton, variable-capacity matched system. The duct test finds a sound trunk and two loose connections on the branch toward the back bedroom, so we reseal those two joints instead of buying a bigger unit or replacing the whole duct system. The pad sits level and above where rain collects, so it stays once the parcel's floodplain requirement is checked.

HouseUtilitycloset36-inch gateClearanceRoute from the street
The lot in plan: the route from the street through the side gate, the clearance kept around the outdoor unit and the utility closet inside.

The work

Two days, and the fence stays up

Day one protects the floor from the front door to the closet, recovers the refrigerant and takes the old equipment out through the gate. We pick an outdoor cabinet that passes the 36-inch opening, so no fence panel comes down, and set both new units. Day two runs a new 30-foot insulated line set, brazed under nitrogen, pressure-tested and evacuated to a micron reading, then seals the two joints with mastic and reconnects the drain.

The handover

Readings first, then the parish inspection

We set the thermostat for the new equipment, test the drain, and measure airflow and static pressure with the back bedroom's register open. The readings stay with you, the old equipment and debris leave with us, and the Jefferson Parish inspection follows the work. The aim is a back bedroom that gets its share of air from a system sized to the house.

Who issues the permit for a Metairie address?

Metairie has no city government of its own, and that decides where the paperwork goes.

Jefferson Parish, not the City

Metairie is an unincorporated community, so Jefferson Parish handles the permit. Replacing or installing air conditioning and heating equipment there is filed with the parish’s Building Regulatory Division before the work starts, and an inspection follows. New Orleans permits stop at the 17th Street Canal, the line between Metairie and the city. Kenner, to the west, runs its own permit office. Your estimate states who obtains the permit and when the inspection happens, and our permit guide walks through each office.

Your electric account

Metairie homes are generally served by Entergy Louisiana, not Entergy New Orleans. That matters for rebates, because the Energy Smart program belongs to Entergy New Orleans accounts. We confirm the account for your address before we talk about incentives, and the rebate guide covers what each program asks for.

Technician testing the electrical compartment of an outdoor heat pump unit beside a raised Mid-City house
Connections at an outdoor unit: the parish inspection looks at the finished installation.
Where the house is Permit office Electric account to confirm
Metairie, from the lakefront to the railroad Jefferson Parish Building Regulatory Division Entergy Louisiana
Kenner, west of Metairie City of Kenner Confirmed per address
River Ridge, south of the railroad Jefferson Parish Confirmed per address
New Orleans, east of the 17th Street Canal City of New Orleans Entergy New Orleans

Which office and electric account usually apply around Metairie; we confirm both for each address.

Replace the system, or fix the air first?

A failing system and an uneven house are often two problems, and we price them as two.

New air handler in a Terrytown hall closet beside an enlarged return grille
An air handler in an interior closet, with its drain trap and duct connections in reach.

Why the same size isn't proof

Matching the old nameplate feels safe, but it only repeats whatever sizing the house got last time. We run a room-by-room load calculation (ACCA Manual J) and size the new system from it. If the back bedroom runs warm because its duct has come loose, a bigger unit just cools the rest of the house harder. Our sizing guide explains the calculation.

Testing the ducts you already have

Where the air handler sits in a closet and the ducts run through the attic, we test those ducts for leakage and static pressure before we plan to reuse them. Sound trunks and branches stay, loose joints get resealed with mastic, and runs that are crushed or undersized go into a ductwork repair line on your estimate. The ductwork guide shows what the tests find.

What we check at a Metairie visit

  • The rooms. Windows, sun and insulation feed the load calculation.
  • The closet or attic. Where the air handler sits, and room for a secondary pan if it is above a ceiling.
  • The ducts. Leakage, static pressure and the return path from every bedroom.
  • The panel. Its rating, open spaces and the circuits already on it.
  • The side yard. Gate width, clearances, the pad and where water goes after a storm.
Insulated flex ducts leaving a sealed supply plenum in a Bayou St. John attic
Insulated supply runs leaving a plenum in an attic, the part of the duct system we test first.

Heavy rain, low yards and where the unit sits

Metairie lies between Lake Pontchartrain and the railroad, only a few feet above sea level.

Water around the outdoor unit

Veterans Memorial Boulevard was laid out alongside a drainage canal, a reminder of how low and wet this ground is. When a summer storm drops more rain than the drains can take at once, side yards hold water for a while. Heating and cooling equipment isn’t built to sit in floodwater, so we look at where water stands on your lot before choosing between the existing pad, a new pad or a raised stand.

The parcel decides the height

Jefferson Parish’s floodplain ordinance sets minimum heights, and whether they apply to your job depends on the parcel and the scope of work. We check that before the permit is filed, not on installation day. Manufacturers also set clearances around the coil and in front of the service panel, and the placement guide shows how both shape the spot.

Heat pump on a raised steel stand beside the side stairs of a Belle Chasse home
An outdoor unit set beside the side steps, raised clear of the ground around it.

Narrow side yards

Where the only route to the back is a side gate, the outdoor cabinet has to fit through it. We measure the gate at the first visit and choose equipment that passes, so the fence stays up.

What a Metairie replacement or installation costs

The parish line doesn't change our range; your house does.

Sweet Olive's typical range for a residential ducted heat pump replacement is $4,250 to $11,750. We set your price after the site visit and write it into your estimate line by line, including the Jefferson Parish permit steps for your address.

What moves a Metairie price

  • Equipment. Capacity from the load calculation, and single-stage versus variable-capacity.
  • The ducts. Resealing a few joints costs far less than a new duct system.
  • Electrical work. Reusing a sound circuit, adding one, or a panel upgrade as a separate line.
  • The outdoor spot. Line-set length, and a new pad or raised stand on a low lot.
  • Access. Gate width, closet size and attic headroom.
  • Controls and permit. A thermostat that matches the equipment, and the parish filing.
A heat pump thermostat on the plaster hallway wall of a New Orleans house
A wall thermostat set up for a system's stages and its backup heat.

Rebates and tax credits

If your house turns out to be on an Entergy New Orleans residential account, the Energy Smart program offers rebates on qualifying equipment installed by a participating contractor, within its current funding period. The federal 25C credit no longer applies to equipment placed in service after December 31, 2025, according to IRS guidance. For a starting budget, try the cost estimator or read the cost guide.