Sweet Olive installs and replaces ducted heat pumps across New Orleans, and we wrote this worksheet for the evening before an estimate visit. It works whoever you get estimates from. Two estimates that look thousands of dollars apart are often pricing different jobs, and this lets you put them side by side, line by line.
Everything on the printable is on this page too. The journal post on what to collect explains why each item matters, the cost guide shows what sits inside a price, and the sizing guide explains the load calculation the first comparison line asks about.
Information to collect
What only you know about the house. Gather it before the visit.

| Item | What to note |
|---|---|
| The address and the account | Full service address; the name on the electric account; the utility on the bill's first page. |
| The rooms | Which rooms are too warm, too cold or damp, and at what time of day. |
| The system now | What heats and cools the house; its approximate age; photos of the outdoor and indoor equipment labels. |
| History | Repairs, maintenance visits and anything a technician measured or replaced. |
| The house | Additions, enclosed porches, new windows, attic conversions or closed-off rooms. |
| Access | Attic hatch or stairs, crawlspace opening, side yard width and any gate. |
| The panel | Photo of the panel door label and breaker directory, cover left on. |
| Your plans | How long you expect to stay, and whether quiet, humidity or running cost matters most. |
What to collect before the visit.
Quote comparison fields
The lines a complete heat pump estimate states. A blank on one estimate is a question for that installer.
| Line | What a complete estimate states |
|---|---|
| Capacity and how it was chosen | A room-by-room load calculation (ACCA Manual J), or the old unit's size? |
| Equipment | Outdoor unit and indoor air handler or coil named by model; single-stage, two-stage or variable-speed; SEER2 and HSPF2. |
| Backup heat | Heat strip size and the circuit it needs. |
| Ducts | Tested for leakage and static pressure before reuse? What is repaired, replaced or added, including returns. |
| Electrical | New circuits, outdoor disconnect, any panel upgrade as a separate line. |
| Outdoor spot | Pad or raised stand, line-set length, clearances, screening where a historic district requires it. |
| Permit | Which office issues it, who obtains it, and whether the fee is in the price. |
| Startup | Airflow, static pressure, charge, drain and float switch checks, with readings left with you. |
| Exclusions | What the estimate leaves out, written down. |
| Total | Priced line by line, so two estimates can be compared item by item. |
The lines to compare between estimates.
Our own estimates are laid out the same way, which is the point: you should be able to check every line. The ductwork guide and the electrical readiness guide explain the two lines that move a price most.
Questions for the installer
Ask each one the same questions, and write the answers on the printable.
- How did you decide the capacity, and can I see the load calculation?
- Will you test the existing ducts before deciding to keep them?
- Does every bedroom have a way for air to get back to the return?
- What electrical work does the new equipment need, and is it in the price?
- Where will the outdoor unit sit, and how high off the ground?
- Who obtains the permit, and when is the inspection?
- What readings do you take at startup, and do I get a copy?
- Which parts of this job are excluded from the estimate?
If an answer is "we always use the same size" or "the ducts are fine" without a test, ask how they know. The permits guide covers the permit question for your address.
