Last updated:
The short answer
If you're replacing a system on an Entergy New Orleans residential account, Energy Smart NOLA lists $200 to $250 per qualifying air-source heat pump, tiered by SEER2 and HSPF2, for qualifying equipment installed by a participating contractor, and the contractors who do our work take part. The federal 25C credit no longer applies to equipment placed in service after December 31, 2025, according to IRS guidance.
Key takeaways
- The account on your electric bill decides eligibility first; the street address alone doesn't.
- Both ratings, SEER2 and HSPF2, have to clear a tier, and they belong to the matched outdoor and indoor pair.
- The program form is written for replacements and asks for documents within 45 days of the work.
- The federal 25C credit is closed for equipment placed in service after December 31, 2025.
A rebate is worth counting only once you know it applies to your house. Energy Smart NOLA pays on qualifying heat pumps, but only for certain electric accounts, certain equipment ratings and certain kinds of projects, and the federal tax credit many people remember is closed.
Sweet Olive replaces and installs ducted heat pumps in homes across New Orleans, and we treat a rebate as a separate line from the price. This guide covers who qualifies, what the equipment has to rate, and what the program asks for after the work. Our cost guide covers the price itself.
Does your house qualify for Energy Smart?
Four conditions decide it, and the first one is printed on your electric bill.
| Condition | What the program form says | How to check it |
|---|---|---|
| The account | The applicant must be an Entergy New Orleans residential customer | The utility name and account type on your electric bill |
| The project | The form is a system replacement rebate: it asks about the replaced system’s age, size and efficiency | Whether a central system is being replaced, failed or still working |
| The equipment | An air-source heat pump whose SEER2 and HSPF2 ratings clear one of three tiers | The rating of the matched outdoor and indoor units together |
| The timing | Service within the program’s current funding period, with the application in within 45 days | The installation date on your invoice |
The conditions on the Energy Smart replacement rebate form, and how to check each one for your house.
Start with the bill, not the map
The program is limited to Entergy New Orleans residential customers, and Entergy New Orleans confirms its territory by account and service address. An address near a parish line, a building on a commercial account or a unit whose service is in someone else’s name can change the answer. Check the utility name and the account type on your bill before anything else.
Replacement, not first installation
The form asks what heated the house before the new system: a heat pump, electric resistance, gas or something else. That makes it a fit for replacing a central system, including a gas furnace moving to a heat pump through our conversion work. A first central system in a house with only window units doesn’t match the form as written.

What the equipment has to rate
The rebate amount follows the system's efficiency tier, and both ratings must clear it.
| Tier | Cooling rating | Heating rating | Rebate per system |
|---|---|---|---|
| Entry | SEER2 of 15.2 or higher | HSPF2 of 7.1 or higher | $200 |
| Middle | SEER2 of 16 or higher | HSPF2 of 7.7 or higher | Between the entry and top amounts, as the form lists |
| Top | SEER2 of 17 or higher | HSPF2 of 7.8 or higher | $250 |
Energy Smart air-source heat pump tiers from the program's replacement rebate form. Both ratings must meet the tier.

Why the indoor unit matters
A heat pump’s SEER2 and HSPF2 belong to a matched combination: the outdoor unit, the indoor coil and the air handler, listed together on an AHRI certificate. The same outdoor unit paired with a different coil can rate lower. The form asks for the condenser, coil and air handler model numbers for that reason, and the program also asks for the EER2 rating.
When a higher tier is worth it
The step between tiers is small next to the price of the equipment, so the rebate alone rarely justifies a jump in tier. Weigh the higher tier for what it does in the house: longer, quieter runs and steadier humidity from two-stage and variable-speed equipment. Our staging comparison and operating cost guide help with that choice; the size still comes from the load calculation.
The paperwork after the work
The program pays on documents, so the application starts the day the system goes in.
What the program form asks for
- The AHRI certificate for the installed combination, which the form says comes from the equipment installer.
- A copy of the invoice, dated, with the service date matching the application.
- The signed rebate form, one per unit, with the new and replaced system details filled in.
- Within 45 days of service. Missing documents stop processing.
- Access for verification. The program can inspect the installed equipment, and the form says refusing an inspection within 60 days can forfeit the rebate.
- Payment by check, with the form allowing four to six weeks for processing.

Rules change with the funding
The form states that requirements and rebate levels can change or end without notice and depend on available funds. We check your account and the proposed equipment against the program’s current rules before a rebate comes off your figure.
Metairie, Kenner and the other parishes
Outside Orleans Parish, your electric account may belong to a different utility, and this program follows the account.
| Area | Permit office for the work | Rebate check |
|---|---|---|
| New Orleans | City of New Orleans Safety and Permits | Entergy New Orleans residential account on the bill |
| Metairie, Harvey, Marrero and other unincorporated Jefferson Parish | Jefferson Parish | The utility named on your bill; Energy Smart covers Entergy New Orleans accounts only |
| Kenner and Gretna | Each city’s own office | The utility named on your bill |
| Chalmette, Belle Chasse | St. Bernard Parish; Plaquemines Parish | The utility named on your bill |
| Slidell | City of Slidell or St. Tammany Parish, by address | The utility named on your bill |
What to check for rebates and permits by area. The permit office comes from the address; the rebate from the account.
If your bill names another utility, ask that utility about its own programs before the work. We don’t assume a suburb has an equivalent program, and we don’t build one into your budget until the utility lists it for your account. The permit guide covers the permit side by area.
The federal tax credit after 2025
The 25C credit for heat pumps ended for new equipment, and the date that matters is when the system was placed in service.
Placed in service on or before December 31, 2025
The credit rules for that tax year apply.
- Claimed with IRS Form 5695 for that year
- Ask a tax professional about your return
- Keep the invoice and the equipment ratings
Placed in service after December 31, 2025
The 25C credit no longer applies, according to IRS guidance.
- Leave it out of your budget
- Utility programs are separate from the tax credit
- Recheck IRS guidance if Congress changes the law
For any system installed now, plan the budget without the federal credit.
The cutoff came from a change in federal law, and the IRS publishes the details in its guidance on the modified energy credits. We don’t give tax advice; we give you an invoice that shows the equipment, the date and the ratings, which is what a tax preparer asks for.
Counting a rebate in your budget
A rebate lowers what you pay after the program approves it; it doesn't change the price or the scope.
Price first, rebate second
Your written estimate prices the work in full. If your account and the equipment qualify, the rebate is a separate amount paid by the program after it processes the application. On a replacement inside our typical range, a rebate of $200 to $250 is a small share of the total; the cost guide shows what moves the price far more.
What a rebate never changes
A tier never changes the capacity your house needs, the condition of your ducts or what the panel can carry. A system chosen for its rebate tier, sized wrong or set on leaky ducts, costs more to live with than the rebate returns. We settle size and airflow first, then choose the tier. If you are weighing a repair instead, our repair or replace guide sets out the comparison.

